Bench
A sturdy bench with through-tenon legs held tight by a wedged stretcher. No screws and no hardware: it goes together in minutes and comes apart for storage.
1 credit
Summary
Parts
Cutting sheets
Assembly
What you get
- At the starting size: 39 3/8" × 13 3/8" × 17 11/16" · 30 1/16" clear between the legs. 6 parts on 1 sheet of 96" × 48".
- A DXF and an SVG of every sheet, nested, with outside cuts, inside cuts and dog-bones on separate layers, at real size.
- A PDF assembly guide with the parts list, the cutting sheets and numbered steps, in your units.
- A license to sell what you make with the plan.
- Free 3D preview before you pay, and a fit guarantee: if a joint does not fit your material, we help you or give your credits back.
Questions
What material should I use?
Plywood or solid board between 5/8" and 1" (15 to 25 mm). Enter the real thickness you measured, because every joint is calculated from it.
Which software opens the DXF?
Any CAM program that reads DXF, such as VCarve, Aspire, Fusion, Alphacam or Mach-compatible tools. Outside cuts, inside cuts and dog-bones are on separate layers.
Can I change the size?
Yes. Every measure has a slider, and the legs, tenons and wedges are recalculated each time. The preview is free; you only use a credit when you download.