Chair
A dining chair made to your table. Set the seat height, the tilt of the backrest and the number of slats, and the sides, stretchers and tenons are recalculated.
2 credits
Summary
Parts
Cutting sheets
Assembly
What you get
- At the starting size: 17 11/16" × 19 3/16" × 33 7/16" · seat at 17 11/16" · backrest tilted 8° with 2 slats. 7 parts on 1 sheet of 96" × 48".
- A DXF and an SVG of every sheet, nested, with outside cuts, inside cuts and dog-bones on separate layers, at real size.
- A PDF assembly guide with the parts list, the cutting sheets and numbered steps, in your units.
- A license to sell what you make with the plan.
- Free 3D preview before you pay, and a fit guarantee: if a joint does not fit your material, we help you or give your credits back.
Questions
What material should I use?
Birch plywood or similar, not MDF. Glue all the tenons: a chair takes a lot more stress than a table.
What backrest angle is best?
Between 6 and 10° is the most comfortable for eating and lingering at the table.
Is it strong enough for daily use?
Glue all the tenons and clamp until dry. For daily use, a screw from the inside into each slat tenon will add years of life.
Which software opens the DXF?
Any CAM program that reads DXF, such as VCarve, Aspire, Fusion, Alphacam or Mach-compatible tools. Outside cuts, inside cuts and dog-bones are on separate layers, and the files are generated at real size.