Coat tree
A freestanding coat tree made of two boards that cross at a half-lap. Set the height, the width of the base and how many branches each board has, and the rest follows. It goes together without screws or hardware.
Summary
Parts
Cutting sheets
Assembly
What you get
- At the starting size: 68 7/8" tall · cross base of 19 11/16" · 6 branches. 2 parts on 1 sheet of 96" × 48".
- A DXF and an SVG of every sheet, nested, with outside cuts, inside cuts and dog-bones on separate layers, at real size.
- A PDF assembly guide with the parts list, the cutting sheets and numbered steps, in your units.
- A license to sell what you make with the plan.
- Free 3D preview before you pay, and a fit guarantee: if a joint does not fit your material, we help you or give your credits back.
Questions
Will it tip over with heavy coats?
A tall coat tree with a small base can tip. The preview warns you when the base is too small for the height: widen it or lower the tree.
How do the branches work?
Each board has branches on both sides. Choose how many per board, their length and their angle. Sand and round the tips so they do not snag clothes.
How is it assembled?
Stand the board with the slot at the bottom, lower the other board from above and the two lock at a half-lap. A drop of glue at the crossing makes it permanent.
Which software opens the DXF?
Any CAM program that reads DXF, such as VCarve, Aspire, Fusion, Alphacam or Mach-compatible tools. Outside cuts, inside cuts and dog-bones are on separate layers, and the files are generated at real size.