Headboard with shelf
A headboard cut to your bed. Set the width, the height of the panel and a shelf for your book, phone or lamp. A rear stretcher hidden behind the mattress is how you screw it to the wall.
2 credits
Summary
Parts
Cutting sheets
Assembly
What you get
- At the starting size: 63" × 5 1/2" × 43 5/16" · panel 23 5/8" high, from 18" to 41 5/8" above the floor · shelf 5 1/8" deep. 5 parts on 1 sheet of 96" × 48".
- A DXF and an SVG of every sheet, nested, with outside cuts, inside cuts and dog-bones on separate layers, at real size.
- A PDF assembly guide with the parts list, the cutting sheets and numbered steps, in your units.
- A license to sell what you make with the plan.
- Free 3D preview before you pay, and a fit guarantee: if a joint does not fit your material, we help you or give your credits back.
Questions
What width should I choose?
The width of the bed plus however much you want to stick out each side. For a 59" (1500 mm) mattress, about 63" (1600 mm).
How is it fixed to the wall?
Hold it against the wall behind the bed and screw it on through the three holes in the rear stretcher. It stays hidden behind the mattress.
Which software opens the DXF?
Any CAM program that reads DXF, such as VCarve, Aspire, Fusion, Alphacam or Mach-compatible tools. Outside cuts, inside cuts and dog-bones are on separate layers, and the files are generated at real size.