Nightstand
A nightstand at the height of your mattress. Add one or more shelves, a back panel and a cable grommet for your charger, and pick a clean top where no tenons show.
1 credit
Summary
Parts
Cutting sheets
Assembly
What you get
- At the starting size: 17 11/16" × 13 3/4" × 21 5/8" · 1 shelf with 17 1/16" clearance · 15 1/8" between the sides · 0.157" back panel in a groove. 5 parts on 2 sheets of 96" × 48".
- A DXF and an SVG of every sheet, nested, with outside cuts, inside cuts and dog-bones on separate layers, at real size.
- A PDF assembly guide with the parts list, the cutting sheets and numbered steps, in your units.
- A license to sell what you make with the plan.
- Free 3D preview before you pay, and a fit guarantee: if a joint does not fit your material, we help you or give your credits back.
Questions
Which back panel should I choose?
In a groove is the workshop finish: the back goes on a separate thin board and slides in through the sides. Or use the same board, with tenons.
What height should it be?
It should normally sit at mattress height.
Which software opens the DXF?
Any CAM program that reads DXF, such as VCarve, Aspire, Fusion, Alphacam or Mach-compatible tools. Outside cuts, inside cuts and dog-bones are on separate layers, and the files are generated at real size.