Pet feeder and bed
A raised feeder and a bed, as a set or on their own. Choose the number of bowls and their size, the height of the feeder and the size of the mattress, and the parts are recalculated for your board.
2 credits
Summary
Parts
Cutting sheets
Assembly
What you get
- At the starting size: Feeder of 20 1/2" × 10 1/4" × 9 13/16" with 2 openings of 6 11/16" · bed of 31 1/2" × 22 1/16", for a mattress of 30 1/16" × 20 3/16". 9 parts on 1 sheet of 96" × 48".
- A DXF and an SVG of every sheet, nested, with outside cuts, inside cuts and dog-bones on separate layers, at real size.
- A PDF assembly guide with the parts list, the cutting sheets and numbered steps, in your units.
- A license to sell what you make with the plan.
- Free 3D preview before you pay, and a fit guarantee: if a joint does not fit your material, we help you or give your credits back.
Questions
Can I make only the feeder or only the bed?
Yes. Select the feeder, the bed or both. You must select at least one.
How high should the feeder be?
The height of the pet's chest, so that it eats standing without bending its neck. For a cat, about 3 to 4 inches (80 to 100 mm).
What size mattress does the bed take?
The summary shows the size of the mattress that fits inside, so you can buy or sew one to match.
Which software opens the DXF?
Any CAM program that reads DXF, such as VCarve, Aspire, Fusion, Alphacam or Mach-compatible tools. Outside cuts, inside cuts and dog-bones are on separate layers, and the files are generated at real size.