Planter box
A raised planter box on legs, with drainage holes in the bottom and an optional shelf below for tools. Set the length, width, height and the depth of the box, and the joints follow.
Summary
Parts
Cutting sheets
Assembly
What you get
- At the starting size: 39 3/8" × 17 11/16" × 31 1/2" · box of 37 15/16" × 14 5/8" × 10 5/16" (about 93.6 liters of soil). 6 parts on 1 sheet of 96" × 48".
- A DXF and an SVG of every sheet, nested, with outside cuts, inside cuts and dog-bones on separate layers, at real size.
- A PDF assembly guide with the parts list, the cutting sheets and numbered steps, in your units.
- A license to sell what you make with the plan.
- Free 3D preview before you pay, and a fit guarantee: if a joint does not fit your material, we help you or give your credits back.
Questions
What material should I use?
For outdoor use, marine plywood or treated wood, with exterior glue. Line the inside with drainage sheet or geotextile and apply exterior stain or oil on the outside.
How deep should the box be?
For vegetables, about 10 to 12 inches (250 to 300 mm) of soil. The summary shows the volume of soil it holds.
What about long planters?
Over about 4 feet the soil pushes on the front and back: add a screw in each tenon or a tie rod inside.
Which software opens the DXF?
Any CAM program that reads DXF, such as VCarve, Aspire, Fusion, Alphacam or Mach-compatible tools. Outside cuts, inside cuts and dog-bones are on separate layers, and the files are generated at real size.