Round coffee table
A round coffee table with crossed half-lap legs. Set the diameter and the height, and the legs, tenons and top follow. It starts at 31 1/2" across: change it to fit your sofa and your room.
Summary
Parts
Cutting sheets
Assembly
What you get
- At the starting size: 31 1/2" × 31 1/2" × 16 9/16" · crossed legs of 25 3/16" and 25 3/16". 3 parts on 1 sheet of 96" × 48".
- A DXF and an SVG of every sheet, nested, with outside cuts, inside cuts and dog-bones on separate layers, at real size.
- A PDF assembly guide with the parts list, the cutting sheets and numbered steps, in your units.
- A license to sell what you make with the plan.
- Free 3D preview before you pay, and a fit guarantee: if a joint does not fit your material, we help you or give your credits back.
Questions
How do I change the diameter?
Use the length and width sliders: when they are equal, and the corner radius is at its maximum, the top is a circle. Make them different for an oval or a rounded rectangle.
What height should a coffee table be?
Usually a little below the seat of the sofa: about 16 1/2" (420 mm) is a common choice.
How do the legs go together?
Stand up the long leg, then drop the short leg over it so the two cross at a half-lap. The top sits on four tenons.
Which software opens the DXF?
Any CAM program that reads DXF, such as VCarve, Aspire, Fusion, Alphacam or Mach-compatible tools. Outside cuts, inside cuts and dog-bones are on separate layers, and the files are generated at real size.