Shelving system
Build it one cube at a time. Each module has finger joints that press together with a rubber mallet, and you choose how many go across and how many go up. Add holes to join the cubes into a single unit.
2 credits
Summary
Parts
Cutting sheets
Assembly
What you get
- At the starting size: 6 modules of 13 3/4" × 13 3/4" × 11 13/16" · assembly of 41 5/16" × 27 9/16" · opening of 12 5/16" × 12 5/16". 24 parts on 2 sheets of 96" × 48".
- A DXF and an SVG of every sheet, nested, with outside cuts, inside cuts and dog-bones on separate layers, at real size.
- A PDF assembly guide with the parts list, the cutting sheets and numbered steps, in your units.
- A license to sell what you make with the plan.
- Free 3D preview before you pay, and a fit guarantee: if a joint does not fit your material, we help you or give your credits back.
Questions
How do the modules join together?
Each cube is held by its fingers. To join neighbors, turn on the joining holes and use screws through the sides, tops and bottoms. The hole diameter is adjustable.
What material should I use?
Plywood is the best choice for the fingers. Enter the real thickness of your board, because the finger width and every slot are calculated from it.
Which software opens the DXF?
Any CAM program that reads DXF, such as VCarve, Aspire, Fusion, Alphacam or Mach-compatible tools. Outside cuts, inside cuts and dog-bones are on separate layers, and the files are generated at real size.