Workbench
A workbench you can rebuild when it wears out. The top is screwed on, not glued, so you can replace it. Add a grid of dog holes for stops and clamps, and a lower shelf for your tools.
Summary
Parts
Cutting sheets
Assembly
What you get
- At the starting size: 59 1/16" × 25 9/16" × 35 7/16" · 49 3/4" between the legs · 90 holes of 13/16" every 3 3/4". 6 parts on 2 sheets of 96" × 48".
- A DXF and an SVG of every sheet, nested, with outside cuts, inside cuts and dog-bones on separate layers, at real size.
- A PDF assembly guide with the parts list, the cutting sheets and numbered steps, in your units.
- A license to sell what you make with the plan.
- Free 3D preview before you pay, and a fit guarantee: if a joint does not fit your material, we help you or give your credits back.
Questions
Why is the top screwed on?
So that when it is worn out you can unscrew it and cut another. Do not glue it.
What are the holes for?
They are a grid of holes for bench dogs and clamps. Spacing and diameter are adjustable: 3 3/4" (96 mm) is the standard of multi-function workbenches.
Is the top strong enough?
The preview checks the span between aprons and warns you if the top may give when struck. Use a thicker board or double it with another layer.
Which software opens the DXF?
Any CAM program that reads DXF, such as VCarve, Aspire, Fusion, Alphacam or Mach-compatible tools. Outside cuts, inside cuts and dog-bones are on separate layers, and the files are generated at real size.