Sign in

Laser kerf and thickness calculator

Cut a square of a known size, measure it with calipers and get your kerf. Stack a few sheets and measure the pile to get their real thickness. Then see what to draw to cut a hole or a part to an exact size.

A drawn 20 millimeter square shown dashed around the slightly smaller square the laser cut, and a stack of sheets measured with calipers19.85 mmkerf = 20 − 19.855 sheets = 15.5 mm3.1 mm eachMeasure a test square and a stack
A cut square is smaller than the drawn one. The difference is the kerf.

These are estimates to help you plan. Manufacturers' own tables and your own tests come first, and nothing here replaces them.