Box with dividers
A box that holds exactly what you need. Set the length, width and height, add dividers in both directions for a removable grid, and choose a lid that lifts off or no lid at all. The teeth press-fit, so it goes together without clamps.
Before you cut: the starting values (a 3 mm sheet and a 0.15 mm kerf) are typical, not yours. Measure your real thickness and kerf and cut a small test in a scrap first: a square and one joint. How to do it.
Summary
Parts
Cutting sheets
Assembly
What you get
- At the starting size: Outside 8 1/8" × 6 1/8" × 3 1/4" · inside 7 7/8" × 5 7/8" × 3 1/8" · 6 compartments. 8 parts on 1 sheet of 24" × 12".
- An SVG with the cuts in red and the engraving in blue, and a DXF of every sheet, at real size and nested.
- A PDF assembly guide with the parts list, the cutting sheets and numbered steps, in your units.
- A license to sell what you make with the plan.
- Free 3D preview before you pay, and a fit guarantee: if a joint does not fit your material, we help you or give your credits back.
Questions
Are the dividers fixed?
No. They cross each other and sit loose in the box, so you can lift the whole grid out. Set the number of dividers to zero for an open box.
What material and thickness should I use?
Use 1/8" (3 mm) birch plywood, basswood plywood or MDF. Measure the real thickness with calipers and enter it under Material, laser and sheet, because the joints are calculated from it.
Which software opens the files?
The SVG opens in LightBurn, xTool Creative Space, Glowforge, Inkscape and Illustrator. The DXF opens in most CAD and CAM programs. The sizes are real, so nothing needs scaling.