Christmas tree
A tree that stands up on its own. Two flat pieces cross each other, so it needs no screws. Choose the height and the number of tiers, add cut-out ornaments, and pick a pot or a stand.
Before you cut: the starting values (a 3 mm sheet and a 0.15 mm kerf) are typical, not yours. Measure your real thickness and kerf and cut a small test in a scrap first: a square and one joint. How to do it.
Summary
Parts
Cutting sheets
Assembly
What you get
- At the starting size: 7 7/8" × 9 7/16" · 4 branch tiers · pot 3 1/8" × 1 3/4". 8 parts on 1 sheet of 24" × 12".
- An SVG with the cuts in red and the engraving in blue, and a DXF of every sheet, at real size and nested.
- A PDF assembly guide with the parts list, the cutting sheets and numbered steps, in your units.
- A license to sell what you make with the plan.
- Free 3D preview before you pay, and a fit guarantee: if a joint does not fit your material, we help you or give your credits back.
Questions
How do I decorate it?
Paint it green, leave it as bare wood, or hang small ornaments from the cut-out holes.
What material and thickness should I use?
Use 1/8" (3 mm) birch plywood, basswood plywood or MDF. Measure the real thickness with calipers and enter it under Material, laser and sheet, because the joints are calculated from it.
Which software opens the files?
The SVG opens in LightBurn, xTool Creative Space, Glowforge, Inkscape and Illustrator. The DXF opens in most CAD and CAM programs. The sizes are real, so nothing needs scaling.