Desk organizer
Everything on your desk in one place. A row of slots for pencils at the back, a tray with dividers at the front and, if you like, a long drawer underneath. Set each depth and height to fit your desk.
Before you cut: the starting values (a 3 mm sheet and a 0.15 mm kerf) are typical, not yours. Measure your real thickness and kerf and cut a small test in a scrap first: a square and one joint. How to do it.
Summary
Parts
Cutting sheets
Assembly
What you get
- At the starting size: 9 7/16" × 5 7/8" × 3 15/16" · 3 slots at the back of 3" × 3 5/16" · tray 2 1/4" deep in 2 compartments. 9 parts on 1 sheet of 24" × 12".
- An SVG with the cuts in red and the engraving in blue, and a DXF of every sheet, at real size and nested.
- A PDF assembly guide with the parts list, the cutting sheets and numbered steps, in your units.
- A license to sell what you make with the plan.
- Free 3D preview before you pay, and a fit guarantee: if a joint does not fit your material, we help you or give your credits back.
Questions
Can I add a drawer?
Yes. Tick the drawer option and set its height. It runs the full length under the tray and the slots.
What material and thickness should I use?
Use 1/8" (3 mm) birch plywood, basswood plywood or MDF. Measure the real thickness with calipers and enter it under Material, laser and sheet, because the joints are calculated from it.
Which software opens the files?
The SVG opens in LightBurn, xTool Creative Space, Glowforge, Inkscape and Illustrator. The DXF opens in most CAD and CAM programs. The sizes are real, so nothing needs scaling.