House number
Numbers that can be read from the street. Type your number or letters, pick a typeface and the height, and join the figures with a bar that has holes for wall spacers, so the number floats off the wall and casts a shadow.
Before you cut: the starting values (a 3 mm sheet and a 0.15 mm kerf) are typical, not yours. Measure your real thickness and kerf and cut a small test in a scrap first: a square and one joint. How to do it.
Summary
Parts
Cutting sheets
Assembly
What you get
- An SVG with the cuts in red and the engraving in blue, and a DXF of every sheet, at real size and nested.
- A PDF assembly guide with the parts list, the cutting sheets and numbered steps, in your units.
- A license to sell what you make with the plan.
- Free 3D preview before you pay, and a fit guarantee: if a joint does not fit your material, we help you or give your credits back.
Questions
How big should the numbers be?
About 4 in (10 cm) of height for every 100 ft (30 m) of distance, so a number meant to be read from the street is usually 5 in (130 mm) or more.
Can I put it outside?
Yes, with exterior-grade plywood sealed with exterior varnish. MDF swells in the rain and is not suitable outdoors.
Which software opens the files?
The SVG opens in LightBurn, xTool Creative Space, Glowforge, Inkscape and Illustrator. The DXF opens in most CAD and CAM programs. The sizes are real, so nothing needs scaling.