Keepsake box with lid
A small box for the things you do not want to lose: rings, keys, a watch, a note. It closes with a lid that guides itself into place, has one divider to keep things apart, and you can engrave a name on the lid. The teeth press-fit, so it goes together without clamps.
Before you cut: the starting values (a 3 mm sheet and a 0.15 mm kerf) are typical, not yours. Measure your real thickness and kerf and cut a small test in a scrap first: a square and one joint. How to do it.
Summary
Parts
Cutting sheets
Assembly
What you get
- At the starting size: Outside 6 9/16" × 4 9/16" × 2 3/8" · inside 6 5/16" × 4 5/16" × 2 3/16" · 2 compartments. 8 parts on 1 sheet of 24" × 12".
- An SVG with the cuts in red and the engraving in blue, and a DXF of every sheet, at real size and nested.
- A PDF assembly guide with the parts list, the cutting sheets and numbered steps, in your units.
- A license to sell what you make with the plan.
- Free 3D preview before you pay, and a fit guarantee: if a joint does not fit your material, we help you or give your credits back.
Questions
Can I engrave a name on the lid?
Yes. Type it under Engraving and choose the height of the letters. The text is engraved on the top of the lid and marked in blue in the SVG, so your laser software treats it as engraving, not cutting.
How does the lid stay on?
The lid has a second piece underneath that fits inside the mouth of the box. It sits in place without hinges and lifts off when you want to open it. Test the fit on a scrap first, because it depends on your real material thickness and kerf.
What material and thickness should I use?
Use 1/8" (3 mm) birch plywood, basswood plywood or MDF. Measure the real thickness with calipers and enter it under Material, laser and sheet, because the joints are calculated from it.
Which software opens the files?
The SVG opens in LightBurn, xTool Creative Space, Glowforge, Inkscape and Illustrator. The DXF opens in most CAD and CAM programs. The sizes are real, so nothing needs scaling.