Name puzzle
A name puzzle for a child's room. Each letter is a separate piece that fits into its own slot in the frame. Type the name, pick a typeface and the height of the letters, and add a short engraved line under it, such as a birth date.
Before you cut: the starting values (a 3 mm sheet and a 0.15 mm kerf) are typical, not yours. Measure your real thickness and kerf and cut a small test in a scrap first: a square and one joint. How to do it.
Summary
Parts
Cutting sheets
Assembly
What you get
- An SVG with the cuts in red and the engraving in blue, and a DXF of every sheet, at real size and nested.
- A PDF assembly guide with the parts list, the cutting sheets and numbered steps, in your units.
- A license to sell what you make with the plan.
- Free 3D preview before you pay, and a fit guarantee: if a joint does not fit your material, we help you or give your credits back.
Questions
How long can the name be?
Up to 14 letters. Accents and dots come out as very small loose pieces, so a name without them is easier to handle.
Should I paint the letters?
If you plan to paint them, set the clearance to 0.3 mm or more, so that they still fit after the paint.
What material and thickness should I use?
Use 1/8" (3 mm) birch plywood, basswood plywood or MDF. Measure the real thickness with calipers and enter it under Material, laser and sheet, because the joints are calculated from it.