Wine bottle box
A gift box made for the bottle in your hands. Choose how many bottles it holds and their diameter and height, and the box and its sliding lid are sized around them. Add a finger notch to open the lid.
Before you cut: the starting values (a 3 mm sheet and a 0.15 mm kerf) are typical, not yours. Measure your real thickness and kerf and cut a small test in a scrap first: a square and one joint. How to do it.
Summary
Parts
Cutting sheets
Assembly
What you get
- At the starting size: Outside 3 9/16" × 3 9/16" × 13 1/2" · 1 bottle up to Ø 3 1/8" × 12 5/8" · sliding lid. 6 parts on 2 sheets of 24" × 12".
- An SVG with the cuts in red and the engraving in blue, and a DXF of every sheet, at real size and nested.
- A PDF assembly guide with the parts list, the cutting sheets and numbered steps, in your units.
- A license to sell what you make with the plan.
- Free 3D preview before you pay, and a fit guarantee: if a joint does not fit your material, we help you or give your credits back.
Questions
Can it hold a champagne bottle?
Yes. Set the diameter to about 3.5 in (90 mm) for sparkling wine and the height to match the bottle.
What material and thickness should I use?
Use 1/8" (3 mm) birch plywood, basswood plywood or MDF. Measure the real thickness with calipers and enter it under Material, laser and sheet, because the joints are calculated from it.
Which software opens the files?
The SVG opens in LightBurn, xTool Creative Space, Glowforge, Inkscape and Illustrator. The DXF opens in most CAD and CAM programs. The sizes are real, so nothing needs scaling.