Sign in

Laser cut box generator (finger joints)

Set the size of the box, the real thickness of your sheet and your laser kerf, and get the parts with finger joints that press-fit. Measure both first: the values below are only typical. Add dividers or a lid that lifts off, then download the SVG (cuts in red) and the DXF, at real size and nested on your sheet.

A laser sheet with the flat parts of a box that have finger joints along their edgesThe parts, nested on your sheetRed lines cut
The parts of a box with finger joints, nested on a laser sheet.

Before you cut the box: measure your thickness and kerf with the kerf calculator, and cut a small test in a scrap.

These are estimates to help you plan. Manufacturers' own tables and your own tests come first, and nothing here replaces them.